| 拨叉执行器DRG 系列拨叉式气动执行机构适用于 90°行程阀门(如球阀、蝶、旋塞)的开关切断或计量控制,可结合各种附件实现工业过程自动控制。其原理是压缩空气进入气缸,推动活塞作直线运动,利用销轴与拔叉滑槽的传动结构将活塞的直线运动转化为拨叉的旋转运动,并带动输出轴转动,从而实现对阀门的控制。 | |||
产品详情 DRG系列气动执行器 DRG eries Pneumatic Actuator DRG 系列 DRG 系列拨叉式气动执行机构适用于 90°行程阀门(如球阀、蝶阀、旋塞阀)的开关切断或计量控制,可结合各种附件实现工业过程自动控制。其原理是压缩空气进入气缸,推动活塞作直线运动,利用销轴与拔叉滑槽的传动结构将活塞的直线运动转化为拨叉的旋转运动,并带动输出轴转动,从而实现对阀门的控制。
DRG scotch yoke pneumatic actuators are fit for turn-off or metering control of 90 valves (suchas ball valves, butterfly valves and plug valves). lt can realize automatic control of industrial processwith various accessories. The principle is that compressed air enters the chamber to push the pistonto do linear motion, the piston's linear motion will be converted into the yoke's rotary motion bytransmission structures of the yoke pin and yoke groove, and drives the output shaft to rotate, thusachieving the control of the valve. DRG 系列拨叉式气动执行器有对称式和倾斜式两种类型,对应两种不同的扭矩输出特性。对称式的拨叉机构,具有更加平衡的扭矩曲线,主要适于球阀、旋塞阀的控制。 There are two types of DRG scotch yoke pneumatic actuators: symmetrical and inclined, whichcorrespond to two different torque output characteristics. The symmetrical yoke mechanism 我司生产的气动执行器广泛应用于石油和天然气、化工、炼油、纸浆和造纸、水处理、电厂、煤化工等行业。 Our pneumatic actuators are widely used in petroleum and natural gas, chemical industry, oilrefining, pulp and paper making, water treatment, power plants and other industries. 工作介质和压力 Workinng Media and Pressure 工作介质一般为干燥压缩空气、惰性气体或抗磨液压油 当介质为气体时 气缸工作压力:3-10bar 最大使用压力:10bar 推荐使用压力:4-6bar 当介质为液体时请咨询本公司 工作温度及密封性能 Working Temperature and Sealing Performance 工作温度 Operating temperatures: 标准-20℃-+80℃ Standard-20℃ to+80℃ 高温-20℃-+150℃ Standard-20℃ to ±150℃ 低温-40℃-+80℃ Low Temperature-40℃ to+80℃ 缸筒内壁和活塞杆表面珩磨并镀硬铬处理,结合0 形圈的动态密封设计,大大提高产品的密封性能。 The cylinder inner wall and piston rod surfacehoning and hard chrome plating, combined withthe dynamic sealing design of O-ring, greatly im-prove the sealing performance of the product. 行程及调节范围 Stroke and Adjusting Range 标准行程0-90°,两个极限位置独立的调节螺栓可方便进行±6°调节;可为用户定制0-60°等非标行程。 Standard stroke 0-90°,two indepent adjustment bolts at the extreme positions can facilitate adjust from-6°to±6°.Non-standard stroke is available,such as 0-60°,etc. |
|